[ 36 ] Items
Renovated Radios LLC II
parts related to the chassis, usually rubber parts
Philco chassis bumper or spacer
(item ch22)
Dimensions: 1-1/16" diameter, 5/8" thick, 1/4" hole
Fada chassis support
(item ch11)
Dimensions: 1/2" lg. diam., 1/8" sm. diam., 1/2" tall
Zenith thick chassis support.
(item ch2)
Dimensions: 1-1/4" diameter, 1/2" thick, 3/8" hole.
Thinnest chassis support
(item ch3)
Dimensions: 1-1/4" diameter, 1/8" thick, 5/16" hole.
Chassis Support
(item ch5)
Dimensions: 1-1/4" diameter, 1/4" thick, 1/4" hole.
Midwest Chassis support
(item ch7)
Dimensions: 1-1/8" diameter, 5/8" thick, 5/16" hole
Philco Chassis support
(item ch8)
Dimensions: base: 1" diameter, 3/8" tall; top: 1/2" diameter, 1/2" tall; 5/16" hole; 13/16" overall height
Philco 690/116, 70, 90 chassis support
(item ch9)
Dimensions: 1” diameter, 1/4” thick, 1/4” hole
Crosley "Super 11" chassis support
(item ch10)
Dimensions: 3/4" long, 1/2" wide base, 3/16" wide, 3/16" tall.
Airline chassis support
(item ch33)
Dimensions: 13/16” diameter base, 5/32” height of base, 1/2” narrower part, 9/32” height, 7/16” overall height, 1/4” hole.
Silvertone chassis support
(item ch12)
Dimensions: base: 3/4" diameter, 3/16" tall; top: 1/2" diameter, 3/8" tall; 1/2" overall height; 1/4" hole
Airline/Wells-Gardener chassis support
(item ch13)
Dimensions: 1-1/4" diameter, 5/8" thick excluding the extended hole, 5/16" hole, hole extends 3/16", smaller holes are 3/16" diameter.
Arvin chassis support
(item ch14)
Dimensions: 1-1/8" diameter (base), 15/16" other diameter, 5/8" tall, 3/8" hole
Zenith thick chassis support.
(item ch1)
Dimensions: 1-1/4" diameter, 3/8" thick, 5/16" hole.
Philco 18 chassis bumper
(item ch20)
Dimensions: 5/8" diameter, 5/8" thick, 1/4" hole, and the groove is 1/8" from one end.
Philco chassis support
(item ch21)
Large Support Dimensions: 1-3/8" large diameter, 1-1/8" small diameter, 7/8"thick, 1/2" hole
Small Support Dimensions: 1-1/16" large diameter, 3/4" small diameter, 5/8" thick, 3/8" hole
Sparton chassis support
(item ch23)
Dimensions: 1-5/8" long, 7/8" wide, 1/4" thick
Philco & Firestone dial bumper
(item ch24)
Dimensions: 1/2" diameter, 1/2 " thick
Grunow chassis support
(item ch27)
Dimensions: 3/4" diameter, 7/16" tall, 5/16" hole, upper section 1/8", lower section 1/4", fits a 1/2" chassis hole
Airline "Movie Dial" chassis support
(item ch28)
Dimensions: base is 1 x 3/4", narrower part is 3/4" x 1/2" , slot is 7/16" wide
Andrea chassis support
(item ch16)
Dimensions: 3/4" bottom diameter, 5/8" top diameter, 3/8" height, fits a 1/2" hole, 1/4" hole in the center.
Philco screw sleeves
(item ch15)
Dimensions: 1/2" diameter, 7/16" thick, 3/16" hole.
Philco sub-chassis supports (set of 3)
(item ch17)
Dimensions: 1-1/8"diameter, 7/8" smaller diameter, 5/16" total thickness, 3/16" hole.
Philco 46-480 dial/pushbutton Support
(item ch19)
Dimensions: 1/2" diameter, 5/16" thick, 1/16" offset groove, with a 1/4" hole, fits a 3/8" chassis hole.
Columbia Graphophone (4) Chassis Mounts
(item ph9)
Dimensions: 7/16” long, 7/16” smaller diameter, 21/32” larger diameter, 1/4” hole
Philco 690/116 sub-chassis supports (set of 3)
(item ch18)
Dimensions: 1" diameter, 3/4" smaller diameter, 7/16" total thickness , 1/4" hole.
Philco shadow meter mask
(item ch26)
Dimensions: 1-1/2" length, 5/8" width, 1/2 " height
Control Shaft Spacer for Philco 37-89
(item ch35)
Dimensions: 1-1/8" diameter, 1/4" thickness. 1/4" hole.
RCA Chassis Support
(item ch39)
Dimensions: 7/8” diameter, 3/8” tall, 3/8” hole
1930's chassis support
(item ch31)
Dimensions: 11/16" x 1/2" x 2-1/4" long. Slot is 3/8" deep, 2-1/8" long.
Wells-Gardner Chassis Support
(ch13b)
Dimensions: 1-14" diameter, 1/2" thick, 3/8" hole