Renovated Radios LLC II : RCA

RCA Drive Idler Wheel
(item t17)

Dimensions: 55/64” diameter, 1/4” hole

RCA Chassis Support
(item ch39)

Dimensions: 7/8” diameter, 3/8” tall, 3/8” hole

RCA chassis support
(item ph2)

Dimensions: 5/8" diameter at the base, 19/32" thick, 13/32" wide at the top, 1/4" hole

RCA phonograph motor mount (set of 3)
(item ph1)

Dimensions: 1/2\" diameter, 3/8\" thick, 1/4\" top hole, 5/16\" bottom hole

RCA Phonograph Small Foot
(item ph4)

RCA tuning drive roller
(item t18b)

RCA Small Foot (1)
(item ph3)

Dimensions: 1/2" outer diameter, 5/16" inner diameter, 5/16" height

RCA tone arm rubber supports
(item ph5)

Dimensions: 1" base diameter, 1/4" base height, 5/8" smaller diameter, 1/2" total height

G.E.,RCA Orthophonic Tuner Mounts
(item t06)

RCA/Fairbanks Morse chassis support
(item ch29)

1930's chassis support
(item ch31)

Dimensions: 11/16" x 1/2" x 2-1/4" long. Slot is 3/8" deep, 2-1/8" long.

Fairbanks-Morse tuner support
(item t08)

Dimensions: 5/8" diameter, 5/16" thick, 1/16" groove, 1/4" hole

RCA tuner support
(item t13)

Dimensions: 3/4" diameter, 3/8" thick, 1/4" hole - Hole it fits in is 1/2”, groove is 1/16”, and lower part is 1/8” thick.

RCA tuning roller
(item t18)

Dimensions: 9/16"diameter, 7/16" tall, 1/8" hole

Zenith/Crosley/RCA tuner support
(item t07)

Dimensions: 3/4" diameter, thin side 1/4", thick side 5/16", groove 0.075", 1/4" hole, fits a 9/16" chassis hole.