{"title":"Rubber Parts","description":"","products":[{"product_id":"cw-365","title":"5-6 Tube Zenith Tuner Support","description":"\u003cp\u003eUsed on the tuner section of some 5-tube radios. Replacing the tuner grommets on these radios will allow the dial to be centered in the cabinet opening.\u003cbr\u003e\u003cbr\u003eZenith used a cupped steel fender washer 3\/4\" OD top and bottom on this tuner with the rubber bushing in between of course. Stuffed into the rubber bushing is a bakelite spacer. It is 1\/4\" OD and a bit over 1\/4\" long. After installation, you tighten down the three nuts from below until the rubber is compressed to match the bakelite tubes in the middle of the rubber bushing.\u003c\/p\u003e\r\n\u003cp\u003eUsed on models: Zenith 5S127 (chassis 5516), 5A127 (chassis 5517A and 5525A), 6S229 (chassis 5638) and other probably other similar models.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: Slightly over 3\/4” diameter, 1\/2\" tall, 1\/4” hole, 7\/32” section on top and bottom, fits a 1\/2” chassis hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405855818049,"sku":"t14","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-t34.jpg?v=1771523158"},{"product_id":"cw-475","title":"Apex Chassis Grommet","description":"\u003cp class=\"normal\"\u003e\u003cspan style=\"caret-color: #000000; color: #000000; font-family: Helvetica; font-size: 14px; font-style: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: auto; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: auto; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration: none; display: inline !important; float: none;\"\u003e\u003cspan\u003e1936 Apex Electric Case 1015 (the dial also has the brand Radio Vogue), Chassis Number 110\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"normal\"\u003e\u003cspan style=\"caret-color: #000000; color: #000000; font-family: Helvetica; font-size: 14px; font-style: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: auto; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: auto; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration: none; display: inline !important; float: none;\"\u003e\u003cspan\u003e\u003cspan\u003eProbably other 1935 \u0026amp; 1936 Apex radios used these same grommets.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"caret-color: #000000; color: #000000; font-family: Helvetica; font-size: 18px; font-style: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: auto; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: auto; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration: none; display: inline !important; float: none;\"\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan class=\"normal\"\u003edimensions: 3\/4\" diameter, 3\/4\" tall, 1\/4\" hole, fits a 5\/8\" chassis hole.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405856637249,"sku":"ch42","price":2.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch42.jpg?v=1771523168"},{"product_id":"cw-292","title":"Chassis Bumper \/ Spacer","description":"\u003cp align=\"left\"\u003eThese large rubber parts are used on the volume control, and tone control shafts to keep the chassis from bumping against the front of the cabinet. Sometimes they need replacing or are missing. They are found on 1937 and 1938 radios that use a sub chassis.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eUsed on all 1937 models EXCEPT Models: 37-33, 37-84, 37-93, 37-600, 37-602, 37-604. All other 1937 Philcos used these.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eUsed on all 1938 models EXCEPT Models 38-12, 38-14, 38-15, 38-33, 38-35, 38-93. All other 1938 Philcos used these.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 1-1\/16\" diameter, 5\/8\" thick, 1\/4\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405856866625,"sku":"ch22","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch22.jpg?v=1771523175"},{"product_id":"cw-261","title":"Chassis Support","description":"\u003cp align=\"left\"\u003eRubber cushion used under the chassis. Used in Waltons, and many other zenith tombstones and consoles from 1935 - 1939. PRICE IS FOR ONE.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eModels: 6B107 6B129, 6B164, 6S128, 6S137, 6S147, 6S152, 6S157, 6S161, 7J232, 7J259, 7S204, 7S232, 7S240, 7S242, 7S258, 7S260, 7S261, 7S633, 8A232, 8A242, 8A129, 8A154, 8A157, 8A244, 8A262, 8S129, 8S154, 9S30 9S54, 9S55, 9S203, 9S204, 9S232, 9S242, 9S244, 9S262, 9S263, 9S264, 10S130, 10S147, 10S153, 10S155, 10S156, 10S157, 10S160, 12S205, 12S232, 12S245, 12S265, 12S266, 12S267, 12S268, 12L57, 12L58, 12A57, 12A58, 15U246, 15U169, 15U270, 15U271, 15U272, 15U273, 1000Z\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 1-1\/4\" diameter, 7\/16\" thick, 5\/16\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405856899393,"sku":"ch1","price":2.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch1.jpg?v=1771523175"},{"product_id":"cw-263","title":"Chassis Support","description":"\u003cp align=\"left\"\u003eA thinner chassis washer for use wherever you need a thinner washer.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 1-1\/4\" diameter, 1\/8\" thick, 5\/16\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405856932161,"sku":"ch3","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch3.jpg?v=1771523176"},{"product_id":"cw-265","title":"Chassis Support","description":"\u003cp\u003eWashers for supporting and cushioning a chassis.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/4\" diameter, 1\/4\" thick, 1\/4\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405856964929,"sku":"ch5","price":2.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch5.jpg?v=1771523177"},{"product_id":"cw-266","title":"Chassis Support","description":"\u003cp\u003eWasher for supporting and cushioning a chassis. Use it as a shim to give more height either to a new washer that's not quite right, or an existing washer to make up for it getting squashed over time.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 7\/8\" diameter, 1\/8\" thick, 1\/4\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857030465,"sku":"ch6","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch6.jpg?v=1771523179"},{"product_id":"cw-267","title":"Chassis Support","description":"\u003cp\u003eThese are washers that support the chassis on several models of Midwest radios.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/8\" diameter, 5\/8\" thick, 5\/16\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857063233,"sku":"ch7","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch7.jpg?v=1771523179"},{"product_id":"cw-268","title":"Chassis Support","description":"\u003cp\u003eChassis supports for Philco chairside radio.\u003c\/p\u003e\r\n\u003cp\u003emodel: 38-7CS\u003c\/p\u003e\r\n\u003cp\u003eDimensions: base: 1\" diameter, 3\/8\" tall; top: 1\/2\" diameter, 1\/2\" tall; 5\/16\" hole; 13\/16\" overall height\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857096001,"sku":"ch8","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch8.jpg?v=1771523181"},{"product_id":"cw-269","title":"Chassis Support","description":"\u003cp\u003eThese are chassis support washers for the large Philco models 116, 690 and model 70 and 90.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1” diameter, 1\/4” thick, 3\/16” hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857128769,"sku":"ch9","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch9.jpg?v=1771523181"},{"product_id":"cw-270","title":"Chassis Support","description":"\u003cp\u003eThese are chassis mounts for Crosley radios. Five of these are used on a Crosley \"Super 11\" console radio: 2 in the front and 3 in the back. They probably are used in several other Crosley models too.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 3\/4\" long, 1\/2\" wide base, 3\/16\" wide, 3\/16\" tall.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857161537,"sku":"ch10","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/rubber-ch10.jpg?v=1771523182"},{"product_id":"cw-271","title":"Chassis Support","description":"\u003cp\u003eFour of these are used to support the chassis on Fada table model radios of the 350 series.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\/2\" lg. diam., 1\/8\" sm. diam., 1\/2\" tall\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857194305,"sku":"ch11","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch11.jpg?v=1771523183"},{"product_id":"cw-272","title":"Chassis Support","description":"\u003cp\u003eChassis mounts for 1930's Silvertone, model 1954 and others. These are much larger than the tuner mounts listed elsewhere on this page though they have the same shape.\u003c\/p\u003e\r\n\u003cp\u003eModels: 1954, 4588A and others\u003c\/p\u003e\r\n\u003cp\u003eDimensions: base: 3\/4\" diameter, 3\/16\" tall; top: 1\/2\" diameter, 3\/8\" tall; 9\/16\" overall height; 1\/4\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857227073,"sku":"ch12","price":2.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch12.jpg?v=1771523184"},{"product_id":"cw-273","title":"Chassis Support","description":"\u003cp\u003ePrice is for one. These are for a Wards Airline (Wells-Gardener) Series 10A72-657, Article No. 62-2705 radio\/phonograph combination. There are 6 of these used on this model. They also are used on Airline model 62-228 \u003cspan\u003eand the Gamble-Skogmo (Coronado) 47LL.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/4\" diameter, 5\/8\" thick excluding the extended hole, 5\/16\" hole, hole extends 3\/16\", smaller holes are 3\/16\" diameter.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857259841,"sku":"ch13","price":3.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch13.jpg?v=1771523185"},{"product_id":"cw-274","title":"Chassis Support","description":"\u003cp\u003eChassis washer for Arvin \"Rhythm Maid\" and probably others. Let me know please.\u003c\/p\u003e\r\n\u003cp\u003emodels: 217\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/8\" diameter (base), 15\/16\" other diameter, 5\/8\" tall, 3\/8\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857292609,"sku":"ch14","price":3.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch14.jpg?v=1771523186"},{"product_id":"cw-276","title":"Chassis Support","description":"\u003cp\u003eThese are chassis mounts\/grommets for an Andrea radio, specifically, model 6H44, but others as well. The top section of the grommet is thinner and smaller in diameter than the bottom section.\u003c\/p\u003e\r\n\u003cp\u003eI'm told these work perfectly on the RCA model 128 tuning gang also.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 3\/4\" bottom diameter, 5\/8\" top diameter, 3\/8\" height, fits a 1\/2\" hole, 1\/4\" hole in the center.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857358145,"sku":"ch16","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch16.jpg?v=1771523187"},{"product_id":"cw-280","title":"Chassis Support","description":"\u003cp align=\"left\"\u003eThis rubber grommet is used in the front of the chassis of the model 18 console and maybe other models. There is only one mounted on the front of the chassis.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 5\/8\" diameter, 5\/8\" thick, 1\/4\" hole, and the groove is 1\/8\" from one end.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857390913,"sku":"ch20","price":2.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch20.jpg?v=1771523187"},{"product_id":"cw-291","title":"Chassis Support","description":"\u003cp\u003eThe smaller ones are used by 1936 models 610, 611, 620, 623, 624, 625, 630, 635, 642. Two used per chassis.\u003c\/p\u003e\r\n\u003cp\u003eThe larger ones are used by models 16, 116, 640, 641, 643. 645, 650, 651, 655, 660, 665 and probably 680. Two used per chassis.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"large","offer_id":51405857423681,"sku":"ch21-large","price":6.0,"currency_code":"USD","in_stock":true},{"title":"small","offer_id":51405857456449,"sku":"ch21-small","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch21.jpg?v=1771523188"},{"product_id":"cw-293","title":"Chassis Support","description":"\u003cp\u003eThese rubber mounts are used to support the chassis. Four are required. Model 1068 and probably others.\u003c\/p\u003e\r\n\u003cp\u003eModels: Sparton 517, Sparton 557, Sparton 558, Sparton 1068\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-5\/8\" long, 7\/8\" wide, 1\/4\" thick\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857489217,"sku":"ch23","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch23.jpg?v=1771523189"},{"product_id":"cw-295","title":"Chassis Support","description":"\u003cp\u003eTwo bumpers are used, one on each side of the top of the dial assembly on Philco models 38-10, 38-9, and others with same chassis. Also work on Firestone \"Air Chief\" S-7398-6 \"Aristocrat\"\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\/2\" diameter, 1\/2 \" thick\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857521985,"sku":"ch24","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch24.jpg?v=1771523190"},{"product_id":"cw-299","title":"Chassis Support","description":"\u003cp align=\"left\"\u003eUsed in Grunow model 1291 for supporting the chassis. Probably also used in many of the Grunow models.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 3\/4\" diameter, 7\/16\" tall, 5\/16\" hole, upper section 1\/8\", lower section 1\/4\", fits a 1\/2\" chassis hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857554753,"sku":"ch27","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch27.jpg?v=1771523191"},{"product_id":"cw-301","title":"Chassis Support","description":"\u003cp\u003eThe bracket that holds the actual movie dial mechanism over the tuning capacitor is held in place by two grommets that go through the front of the chassis. If yours are destroyed by time, as most of them are, here's a perfect replacement for them. No need to fudge it with messy silicone caulk.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: base is 1 x 3\/4\", narrower part is 3\/4\" x 1\/2\" , slot is 7\/16\" wide\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857587521,"sku":"ch28","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch28.jpg?v=1771523192"},{"product_id":"cw-303","title":"Chassis Support","description":"\u003cp\u003eThese grommets support the chassis, one on each corner. They need a hollow steel insert. The bolt goes through the steel insert.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\" diameter, 1\/2\" thick, 1\/2\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857653057,"sku":"ch30","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch30.jpg?v=1771523193"},{"product_id":"cw-332","title":"Chassis Support","description":"\u003cp\u003eUsed on Airline model 14WG-737A (chassis 7A58)\u003cbr\u003eAlso uesd on \u003cspan\u003eSilvetone 2421\u003c\/span\u003e farm radio chassis 101.602, probably model 2061 also.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 13\/16” diameter base, 5\/32” height of base, 1\/2” narrower part, 9\/32” height, 7\/16” overall height, 1\/4” hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857685825,"sku":"ch33","price":2.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch33.jpg?v=1771523194"},{"product_id":"cw-542","title":"Chassis Support","description":"\u003cp align=\"left\"\u003eThis chassis cushion is similar to ch1, but slightly thicker, and with a wider hole to make it easier to line up the chassis hole with the cabinet hole.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eRubber cushion used under the chassis. Used in Waltons, and many other zenith tombstones and consoles from 1935 - 1939. PRICE IS FOR ONE.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eModels: 6B107 6B129, 6B164, 6S128, 6S137, 6S147, 6S152, 6S157, 6S161, 7J232, 7J259, 7S204, 7S232, 7S240, 7S242, 7S258, 7S260, 7S261, 7S633, 8A232, 8A242, 8A129, 8A154, 8A157, 8A244, 8A262, 8S129, 8S154, 9S30 9S54, 9S55, 9S203, 9S204, 9S232, 9S242, 9S244, 9S262, 9S263, 9S264, 10S130, 10S147, 10S153, 10S155, 10S156, 10S157, 10S160, 12S205, 12S232, 12S245, 12S265, 12S266, 12S267, 12S268, 12L57, 12L58, 12A57, 12A58, 15U246, 15U169, 15U270, 15U271, 15U272, 15U273, 1000ZDimensions: 1-1\/4\" diameter, 1\/2\" thick, 3\/8\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857718593,"sku":"ch2","price":2.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch2.jpg?v=1771523195"},{"product_id":"cw-275","title":"Chassis Supports","description":"\u003cp align=\"left\"\u003eThese sleeves are supposed to help cushion the chassis from underneath the board it's mounted on. The ones on my Philco 40-190 were hard as a rock.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 1\/2\" diameter, 7\/16\" thick, 3\/16\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405860864321,"sku":"ch15","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch15.jpg?v=1771523196"},{"product_id":"cw-296","title":"Chassis Supports (4)","description":"\u003cp align=\"left\"\u003eThese rubber mounts are located on the four corners of the chassis and keep it suspended giving the chassis some \"wiggle room\" to prevent the tubes from being jarred by someone bumping the radio. These new corners mounts will bring your chassis back up to the correct height and your control shafts will then be centered in the cabinet holes instead of rubbing on the bottoms of the holes.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eFound on models: 1935 models and model 16, 18, 37-62-T, 38-1, 38-2, 38-3, 38-4, 38-7, 38-9, 38-10,  39-25, 39-30, 39-40, 39-55RX, 39-116, 40-30,  40-50, 40-180, 40-150, 40-155, 40-158, 40-160, 40-165, 40-180, 40-185, 40-190, 40-195, 41-250, 41-255, 41-256, 41-265, 41-280, 41-285, 41-290, 41-295, 41-296, \u003cspan\u003e41-300, 41-315, \u003cspan\u003e41-316\u003c\/span\u003e, 41-316 and 41-616\u003c\/span\u003e41-608, 41-609, \u003cspan\u003e41-616\u003c\/span\u003e, 42-39, 42-355, 42-360F, 42-380, 42-380X, 42-395, 42-400, 42-1008, \u003cspan\u003e\u003cspan\u003e42-1010, 42-1011, \u003c\/span\u003e42-1015\u003c\/span\u003e, 45, 118X, and more.\u003cbr\u003e Possibly fit the 48-1274 (Hepplewhite) and the 48-1276 (Sheraton). \u003cbr\u003e Philco television 48- 700, 49-1040, TV-only “mini-console” models 49-1150, 49-1290, and 49-1450 and probably all TV\/Radio and TV\/Radio\/Phono “combination” models from the 1949 model year containing the same type of TV chassis. Airline 62-704 as well.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eIf anyone knows of any other models that use them, I'd appreciate it if you'd let me know.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 3\/4\" length, 3\/4\" width, 1\" height\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405860897089,"sku":"ch25","price":14.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch25.jpg?v=1771523198"},{"product_id":"cw-277","title":"Chassis Supports (set of 3)","description":"\u003cp\u003eHere's a part I'll bet you can use. These are Urethane isolation grommets for Philco chassis such as the 37-610. This chassis has a separate RF sub-chassis mounted in the center of the main chassis, and it's suspended there by three of these grommets. The grommets are usually hard as rock and crumbling. These grommets are the right size, and the right hardness, and will reduce vibrations. \u003cbr\u003e Note: The Philco Radiobar 37-61 uses a similar part but these are a little too thick These can be used if you jam them in.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTwo pieces of this set are identical. They go on the sides of the sub-chassis. One is smaller in diameter, and thicker. It supports the back of the sub-chassis.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/8\"diameter, 7\/8\" smaller diameter, 5\/16\" total thickness, 3\/16\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405860962625,"sku":"ch17","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch17.jpg?v=1771523199"},{"product_id":"cw-405","title":"Crosley Dashboard Foot","description":"\u003cp\u003eRubber feet for \"Dashboard\" style radios. Some models take 2, some take 4 feet.\u003c\/p\u003e\r\n\u003cp\u003eModels D-25, and 10-135 through 10-140, 11-120 U through 11-125 U, and E-15.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1” diameter, 1\/2” tall, 3\/8\" extends below radio bottom\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"A","offer_id":51405861192001,"sku":"mc2","price":3.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Crosley-f1.jpg?v=1771523206"},{"product_id":"cw-375","title":"Crosley D25 Speaker Gasket","description":"\u003cp\u003eFrequently, the gasket between the speaker and the case is very hard and brittle, and may have pieces missing from it. If you are putting one of these fine radios back into working order, why not replace the gasket with a new, supple, rubber one. Just pull out three retainers, and push this one in place, pop in the old retainers, and your radio will thank you.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 5\/8\" thick, 2-1\/2\" gap in bottom, 3-3\/4\" between top hole and plug, 4-1\/2\" between bottom holes\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405862338881,"sku":"mc","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Crosley-D25-speaker-mask.jpg?v=1771523217"},{"product_id":"cw-279","title":"Dial Support","description":"\u003cp\u003eThese are small grommets that go on the push-button assembly between it and the copper\/brown plate that is behind the dial. Some used on the back support too. A total of 9 needed I'm told.  (NOTE: same as item t20)\u003c\/p\u003e\r\n\u003cp\u003eModels: 40-135 ,40-165 (push buttons use 3, tuning condenser uses 4) and 46-480, 41-608. Also \u003cspan\u003eThe dial supports are the exact replacements for the Philco 40-150. They are used in 6 places. 4 for the tuner, 2 for the pushbutton assembly (according to a restorer). \u003c\/span\u003eAlso used on tuners of some of the transitone table bakelite models such as the 46-200.\u003c\/p\u003e\r\n\u003cp\u003eAlso used on the back of the tuner on a Phico 37-61\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\/2\" diameter, 5\/16\" thick, 1\/16\" offset groove, with a 1\/4\" hole, fits a 3\/8\" chassis hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405863125313,"sku":"ch19","price":2.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch19.jpg?v=1771523227"},{"product_id":"cw-422","title":"Drive Wheel","description":"\u003cp\u003eUsed in the tuning friction drive mechanism on the Regenoflex and the Radiola X.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 55\/64” diameter, 1\/4” hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405863158081,"sku":"t17","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-T31.jpg?v=1771523229"},{"product_id":"cw-453","title":"Fada 1000","description":"\u003cp\u003eGrommet for Fada 1000 and other Fada radios.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 9\/16\" width, 3\/16\" tall, 7\/32\" hole, fits a 3\/8\" chassis hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405863813441,"sku":"t21","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-T21.jpg?v=1771523238"},{"product_id":"cw-423","title":"Graphophone Chassis Support","description":"\u003cp\u003eSold as a set of four. Isolates the cabinet from the bedplate. Used on Columbia Model A, AA, AT, AO, AW, BE, BF, and maybe others.\u003c\/p\u003e\r\n\u003cp\u003ePRICE IS FOR ONE.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 7\/16” long, 7\/16” smaller diameter, 21\/32” larger diameter, 1\/4” hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405865353537,"sku":"ph9","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch37.jpg?v=1771523261"},{"product_id":"cw-436","title":"Hallicrafters Rubber Foot","description":"\u003cp\u003eReplace your hardened and cracked rubber feet on you S-38 and models that use a similar foot. SAVE YOUR OLD FEET. They have a metal insert that you will need for the new feet. These feet don't come with the inserts. PRICE IS FOR ONE FOOT\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405865517377,"sku":"s14","price":2.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Hardware-h6.jpg?v=1771523264"},{"product_id":"cw-374","title":"Motorola CRT Mask","description":"\u003cp\u003eMotorola VT-71, VT-73 television\u003cbr\u003e\u003cbr\u003eInstallation note: It may be difficult to get the CRT to seat into the depression on the back of the mask. Try using water, or some other lubricant that dries quickly. You don't want to use Vaseline or something else that will stay on the rubber for a long time as the rubber may be adversely affected by it over time.\u003c\/p\u003e\r\n\u003cp\u003eIf that doesn't work, use an Exacto knife to trim a thin strip of rubber from the edge where it meets the tube edge, thereby enlarging the opening. Use a new blade. The mask cuts easily and the trimmed area will not show as it faces toward the back of the cabinet.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 7-1\/2” x 8-1\/2” x 1-1\/4”\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405873807681,"sku":"m1","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Motorola-mask-a.jpg?v=1771523286"},{"product_id":"cw-452","title":"Philco Hippo Tuner Grommet","description":"\u003cp\u003eUsed in the 42-390, 46-200, 46-420, and 48- models code 121 and 40-180. Other models used a different tuner grommet. \u003cspan\u003ePhilco mystery remote dial, also for the volume control motor and stepper assembly on a 40-216\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eSee item t01.\u003c\/p\u003e\r\n\u003cp\u003e(NOTE: same as item ch19)\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\/2\" wide, 11\/32\" tall, 1\/4\" hole, fits a 5\/16\" chassis hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405874200897,"sku":"t20","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-T20.jpg?v=1771523292"},{"product_id":"cw-278","title":"Philco 690 Chassis Supports (set of 3)","description":"\u003cp\u003eThese are silicone isolation grommets for Philco chassis such as the 37-690 and 38-690. This chassis is like the described above, but the holes for the grommets are smaller. These grommets are a little taller so they reach into the hole farther.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\" diameter, 3\/4\" smaller diameter, 7\/16\" total thickness , 1\/4\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405874430273,"sku":"ch18","price":8.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch18.jpg?v=1771523298"},{"product_id":"cw-450","title":"Philco 89 Tuning Cap Washer Zenith Tuning Capacitor","description":"\u003cp\u003eUsed on Philco model 89 to support the tuning capacitor.\u003c\/p\u003e\r\n\u003cp\u003eAlso used on Zenith 807 tuning capacitor (requires 6)\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 5\/8” diameter, 13\/64” thick, 7\/32” hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405874463041,"sku":"t19","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-T19.jpg?v=1771523299"},{"product_id":"cw-264","title":"Philco Chassis Support","description":"\u003cp\u003eUsed between the chassis and the board it sits on. Used on 1932 - 1938 Philco radios.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 7\/8\" diameter, 1\/4\" thick, 1\/4\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405874692417,"sku":"ch4","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch4.jpg?v=1771523306"},{"product_id":"cw-447","title":"Philco Chassis Support","description":"\u003cp\u003eUsed between the chassis and the board it sits on. Used on 1932 - 1938 Philco radios.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 7\/8\" diameter, 3\/8\" thick, 1\/4\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405874725185,"sku":"ch32","price":2.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch32.jpg?v=1771523306"},{"product_id":"cw-297","title":"Philco Shadow Meter Mask","description":"\u003cp\u003eIf you've discovered some nasty black goop on the inside of your radio cabinet that has dripped down over the dial, tuner, and chassis, it's probably all that's left of the original shadow meter mask. This mask goes over the light-box end of the meter. It acts as a bumper against the front of the cabinet and also seals the opening so light goes where it's intended.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/2\" length, 5\/8\" width, 1\/2 \" height\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405875315009,"sku":"ch26","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch26.jpg?v=1771523322"},{"product_id":"cw-345","title":"Philco Thin Chassis Bumper \/ Spacer","description":"\u003cp\u003eThese grommets are used on the control shafts to keep the chassis from bumping against the front of the cabinet. Sometimes they need replacing or are missing. These were found on a Philco model 37-89. Probably used on other models too.   \u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/8\" diameter, 1\/4\" thickness. 1\/4\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405875478849,"sku":"ch35","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch36.jpg?v=1771523326"},{"product_id":"cw-363","title":"RCA 143 Chassis Support","description":"\u003cp\u003eUsed on RCA model 143 May also be used on the RCA model 128 and possibly others. It uses EIGHT washers - four above the bottom board and four below.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 7\/8” diameter, 3\/8” tall, 3\/8” hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405876166977,"sku":"ch39","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch39.jpg?v=1771523340"},{"product_id":"cw-325","title":"RCA chassis support","description":"\u003cp\u003eThese flexible cones support the changer mechanism inside the cabinet. They are stiff enough to support the weight, yet flexible enough to still reduce vibrations that can be transmitted to the pickup.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 5\/8\" diameter at the base, 19\/32\" thick, 13\/32\" wide at the top, 1\/4\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405876232513,"sku":"ph2","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Phono-ph2.jpg?v=1771523343"},{"product_id":"cw-324","title":"RCA Motor Mounts (3)","description":"\u003cp\u003eThese small grommets cushion the motor at its mountings so that it doesn\\'t transfer vibrations to the needle. They are a soft gum-rubber type of urethane; just what you need to let your player reproduce the recorded sound rather than the rumble from the mechanism.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\/2\\\" diameter, 3\/8\\\" thick, 1\/4\\\" top hole, 5\/16\\\" bottom hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405876429121,"sku":"ph1","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Phono-ph1.jpg?v=1771523347"},{"product_id":"cw-327","title":"RCA Phono Large Foot","description":"\u003cp\u003eLarge rubber feet that press into holes in the bottom of vintage RCA phonographs.\u003c\/p\u003e\r\n\u003cp\u003eThese fit models 6-JY-1C, 9-JY, 45-J-2 and others with 9\/16\" holes.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: ~5\/8\" diameter, 1\/4\" height (exposed part), fits a 9\/16\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405876461889,"sku":"ph4","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Phono-ph4.jpg?v=1771523348"},{"product_id":"cw-506","title":"RCA Radiola Tuning Roller","description":"\u003cp\u003eRubber tuning roller used on RCA Radiola.\u003c\/p\u003e\r\n\u003cp\u003eModels: Superette R7\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 5\/8\" diameter, 3\/16\" thick, 1\/4\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405876691265,"sku":"t18b-Radiola-roller","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-t135.jpg?v=1771523356"},{"product_id":"cw-326","title":"RCA Small Foot","description":"\u003cp\u003eSmall rubber feet that fit over the pegs on RCA 45 record players: models 45-EY-4, 45-HY-4, and 8-EY-4.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\/2\" outer diameter, 5\/16\" inner diameter, 5\/16\" height\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405876789569,"sku":"ph3","price":1.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Phono-ph3.jpg?v=1771523359"},{"product_id":"cw-368","title":"RCA Tone Arm Supports","description":"\u003cp\u003eThese rubber bushings are used inside the tonearm.\u003c\/p\u003e\r\n\u003cp\u003ePrice is $10.00 for both.\u003c\/p\u003e\r\n\u003cp\u003eModels: 331, 341, 380, 380HR, 381, R99, 9U, 9U2, D11-2, 15U, D22-1, U106, U107, U108, U109\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\" base diameter, 1\/4\" base height, 5\/8\" smaller diameter, 1\/2\" total height\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405876822337,"sku":"ph5","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ph5b.jpg?v=1771523360"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/collections\/515267939_10233456454546460_3239685727379947273_n.jpg?v=1770575504","url":"https:\/\/renovatedradios.com\/collections\/rubber-parts.oembed","provider":"Renovated Radios, LLC: Reproduction Vintage Radio Parts","version":"1.0","type":"link"}