{"title":"Chassis Parts","description":"","products":[{"product_id":"cw-365","title":"5-6 Tube Zenith Tuner Support","description":"\u003cp\u003eUsed on the tuner section of some 5-tube radios. Replacing the tuner grommets on these radios will allow the dial to be centered in the cabinet opening.\u003cbr\u003e\u003cbr\u003eZenith used a cupped steel fender washer 3\/4\" OD top and bottom on this tuner with the rubber bushing in between of course. Stuffed into the rubber bushing is a bakelite spacer. It is 1\/4\" OD and a bit over 1\/4\" long. After installation, you tighten down the three nuts from below until the rubber is compressed to match the bakelite tubes in the middle of the rubber bushing.\u003c\/p\u003e\r\n\u003cp\u003eUsed on models: Zenith 5S127 (chassis 5516), 5A127 (chassis 5517A and 5525A), 6S229 (chassis 5638) and other probably other similar models.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: Slightly over 3\/4” diameter, 1\/2\" tall, 1\/4” hole, 7\/32” section on top and bottom, fits a 1\/2” chassis hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405855818049,"sku":"t14","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-t34.jpg?v=1771523158"},{"product_id":"cw-475","title":"Apex Chassis Grommet","description":"\u003cp class=\"normal\"\u003e\u003cspan style=\"caret-color: #000000; color: #000000; font-family: Helvetica; font-size: 14px; font-style: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: auto; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: auto; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration: none; display: inline !important; float: none;\"\u003e\u003cspan\u003e1936 Apex Electric Case 1015 (the dial also has the brand Radio Vogue), Chassis Number 110\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"normal\"\u003e\u003cspan style=\"caret-color: #000000; color: #000000; font-family: Helvetica; font-size: 14px; font-style: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: auto; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: auto; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration: none; display: inline !important; float: none;\"\u003e\u003cspan\u003e\u003cspan\u003eProbably other 1935 \u0026amp; 1936 Apex radios used these same grommets.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"caret-color: #000000; color: #000000; font-family: Helvetica; font-size: 18px; font-style: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: auto; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: auto; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration: none; display: inline !important; float: none;\"\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan class=\"normal\"\u003edimensions: 3\/4\" diameter, 3\/4\" tall, 1\/4\" hole, fits a 5\/8\" chassis hole.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405856637249,"sku":"ch42","price":2.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch42.jpg?v=1771523168"},{"product_id":"cw-292","title":"Chassis Bumper \/ Spacer","description":"\u003cp align=\"left\"\u003eThese large rubber parts are used on the volume control, and tone control shafts to keep the chassis from bumping against the front of the cabinet. Sometimes they need replacing or are missing. They are found on 1937 and 1938 radios that use a sub chassis.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eUsed on all 1937 models EXCEPT Models: 37-33, 37-84, 37-93, 37-600, 37-602, 37-604. All other 1937 Philcos used these.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eUsed on all 1938 models EXCEPT Models 38-12, 38-14, 38-15, 38-33, 38-35, 38-93. All other 1938 Philcos used these.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 1-1\/16\" diameter, 5\/8\" thick, 1\/4\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405856866625,"sku":"ch22","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch22.jpg?v=1771523175"},{"product_id":"cw-261","title":"Chassis Support","description":"\u003cp align=\"left\"\u003eRubber cushion used under the chassis. Used in Waltons, and many other zenith tombstones and consoles from 1935 - 1939. PRICE IS FOR ONE.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eModels: 6B107 6B129, 6B164, 6S128, 6S137, 6S147, 6S152, 6S157, 6S161, 7J232, 7J259, 7S204, 7S232, 7S240, 7S242, 7S258, 7S260, 7S261, 7S633, 8A232, 8A242, 8A129, 8A154, 8A157, 8A244, 8A262, 8S129, 8S154, 9S30 9S54, 9S55, 9S203, 9S204, 9S232, 9S242, 9S244, 9S262, 9S263, 9S264, 10S130, 10S147, 10S153, 10S155, 10S156, 10S157, 10S160, 12S205, 12S232, 12S245, 12S265, 12S266, 12S267, 12S268, 12L57, 12L58, 12A57, 12A58, 15U246, 15U169, 15U270, 15U271, 15U272, 15U273, 1000Z\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 1-1\/4\" diameter, 7\/16\" thick, 5\/16\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405856899393,"sku":"ch1","price":2.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch1.jpg?v=1771523175"},{"product_id":"cw-263","title":"Chassis Support","description":"\u003cp align=\"left\"\u003eA thinner chassis washer for use wherever you need a thinner washer.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 1-1\/4\" diameter, 1\/8\" thick, 5\/16\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405856932161,"sku":"ch3","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch3.jpg?v=1771523176"},{"product_id":"cw-265","title":"Chassis Support","description":"\u003cp\u003eWashers for supporting and cushioning a chassis.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/4\" diameter, 1\/4\" thick, 1\/4\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405856964929,"sku":"ch5","price":2.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch5.jpg?v=1771523177"},{"product_id":"cw-266","title":"Chassis Support","description":"\u003cp\u003eWasher for supporting and cushioning a chassis. Use it as a shim to give more height either to a new washer that's not quite right, or an existing washer to make up for it getting squashed over time.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 7\/8\" diameter, 1\/8\" thick, 1\/4\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857030465,"sku":"ch6","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch6.jpg?v=1771523179"},{"product_id":"cw-267","title":"Chassis Support","description":"\u003cp\u003eThese are washers that support the chassis on several models of Midwest radios.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/8\" diameter, 5\/8\" thick, 5\/16\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857063233,"sku":"ch7","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch7.jpg?v=1771523179"},{"product_id":"cw-268","title":"Chassis Support","description":"\u003cp\u003eChassis supports for Philco chairside radio.\u003c\/p\u003e\r\n\u003cp\u003emodel: 38-7CS\u003c\/p\u003e\r\n\u003cp\u003eDimensions: base: 1\" diameter, 3\/8\" tall; top: 1\/2\" diameter, 1\/2\" tall; 5\/16\" hole; 13\/16\" overall height\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857096001,"sku":"ch8","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch8.jpg?v=1771523181"},{"product_id":"cw-269","title":"Chassis Support","description":"\u003cp\u003eThese are chassis support washers for the large Philco models 116, 690 and model 70 and 90.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1” diameter, 1\/4” thick, 3\/16” hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857128769,"sku":"ch9","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch9.jpg?v=1771523181"},{"product_id":"cw-270","title":"Chassis Support","description":"\u003cp\u003eThese are chassis mounts for Crosley radios. Five of these are used on a Crosley \"Super 11\" console radio: 2 in the front and 3 in the back. They probably are used in several other Crosley models too.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 3\/4\" long, 1\/2\" wide base, 3\/16\" wide, 3\/16\" tall.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857161537,"sku":"ch10","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/rubber-ch10.jpg?v=1771523182"},{"product_id":"cw-271","title":"Chassis Support","description":"\u003cp\u003eFour of these are used to support the chassis on Fada table model radios of the 350 series.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\/2\" lg. diam., 1\/8\" sm. diam., 1\/2\" tall\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857194305,"sku":"ch11","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch11.jpg?v=1771523183"},{"product_id":"cw-272","title":"Chassis Support","description":"\u003cp\u003eChassis mounts for 1930's Silvertone, model 1954 and others. These are much larger than the tuner mounts listed elsewhere on this page though they have the same shape.\u003c\/p\u003e\r\n\u003cp\u003eModels: 1954, 4588A and others\u003c\/p\u003e\r\n\u003cp\u003eDimensions: base: 3\/4\" diameter, 3\/16\" tall; top: 1\/2\" diameter, 3\/8\" tall; 9\/16\" overall height; 1\/4\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857227073,"sku":"ch12","price":2.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch12.jpg?v=1771523184"},{"product_id":"cw-273","title":"Chassis Support","description":"\u003cp\u003ePrice is for one. These are for a Wards Airline (Wells-Gardener) Series 10A72-657, Article No. 62-2705 radio\/phonograph combination. There are 6 of these used on this model. They also are used on Airline model 62-228 \u003cspan\u003eand the Gamble-Skogmo (Coronado) 47LL.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/4\" diameter, 5\/8\" thick excluding the extended hole, 5\/16\" hole, hole extends 3\/16\", smaller holes are 3\/16\" diameter.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857259841,"sku":"ch13","price":3.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch13.jpg?v=1771523185"},{"product_id":"cw-274","title":"Chassis Support","description":"\u003cp\u003eChassis washer for Arvin \"Rhythm Maid\" and probably others. Let me know please.\u003c\/p\u003e\r\n\u003cp\u003emodels: 217\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/8\" diameter (base), 15\/16\" other diameter, 5\/8\" tall, 3\/8\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857292609,"sku":"ch14","price":3.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch14.jpg?v=1771523186"},{"product_id":"cw-276","title":"Chassis Support","description":"\u003cp\u003eThese are chassis mounts\/grommets for an Andrea radio, specifically, model 6H44, but others as well. The top section of the grommet is thinner and smaller in diameter than the bottom section.\u003c\/p\u003e\r\n\u003cp\u003eI'm told these work perfectly on the RCA model 128 tuning gang also.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 3\/4\" bottom diameter, 5\/8\" top diameter, 3\/8\" height, fits a 1\/2\" hole, 1\/4\" hole in the center.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857358145,"sku":"ch16","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch16.jpg?v=1771523187"},{"product_id":"cw-280","title":"Chassis Support","description":"\u003cp align=\"left\"\u003eThis rubber grommet is used in the front of the chassis of the model 18 console and maybe other models. There is only one mounted on the front of the chassis.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 5\/8\" diameter, 5\/8\" thick, 1\/4\" hole, and the groove is 1\/8\" from one end.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857390913,"sku":"ch20","price":2.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch20.jpg?v=1771523187"},{"product_id":"cw-291","title":"Chassis Support","description":"\u003cp\u003eThe smaller ones are used by 1936 models 610, 611, 620, 623, 624, 625, 630, 635, 642. Two used per chassis.\u003c\/p\u003e\r\n\u003cp\u003eThe larger ones are used by models 16, 116, 640, 641, 643. 645, 650, 651, 655, 660, 665 and probably 680. Two used per chassis.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"large","offer_id":51405857423681,"sku":"ch21-large","price":6.0,"currency_code":"USD","in_stock":true},{"title":"small","offer_id":51405857456449,"sku":"ch21-small","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch21.jpg?v=1771523188"},{"product_id":"cw-293","title":"Chassis Support","description":"\u003cp\u003eThese rubber mounts are used to support the chassis. Four are required. Model 1068 and probably others.\u003c\/p\u003e\r\n\u003cp\u003eModels: Sparton 517, Sparton 557, Sparton 558, Sparton 1068\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-5\/8\" long, 7\/8\" wide, 1\/4\" thick\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857489217,"sku":"ch23","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch23.jpg?v=1771523189"},{"product_id":"cw-295","title":"Chassis Support","description":"\u003cp\u003eTwo bumpers are used, one on each side of the top of the dial assembly on Philco models 38-10, 38-9, and others with same chassis. Also work on Firestone \"Air Chief\" S-7398-6 \"Aristocrat\"\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\/2\" diameter, 1\/2 \" thick\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857521985,"sku":"ch24","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch24.jpg?v=1771523190"},{"product_id":"cw-299","title":"Chassis Support","description":"\u003cp align=\"left\"\u003eUsed in Grunow model 1291 for supporting the chassis. Probably also used in many of the Grunow models.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 3\/4\" diameter, 7\/16\" tall, 5\/16\" hole, upper section 1\/8\", lower section 1\/4\", fits a 1\/2\" chassis hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857554753,"sku":"ch27","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch27.jpg?v=1771523191"},{"product_id":"cw-301","title":"Chassis Support","description":"\u003cp\u003eThe bracket that holds the actual movie dial mechanism over the tuning capacitor is held in place by two grommets that go through the front of the chassis. If yours are destroyed by time, as most of them are, here's a perfect replacement for them. No need to fudge it with messy silicone caulk.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: base is 1 x 3\/4\", narrower part is 3\/4\" x 1\/2\" , slot is 7\/16\" wide\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857587521,"sku":"ch28","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch28.jpg?v=1771523192"},{"product_id":"cw-303","title":"Chassis Support","description":"\u003cp\u003eThese grommets support the chassis, one on each corner. They need a hollow steel insert. The bolt goes through the steel insert.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\" diameter, 1\/2\" thick, 1\/2\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857653057,"sku":"ch30","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch30.jpg?v=1771523193"},{"product_id":"cw-332","title":"Chassis Support","description":"\u003cp\u003eUsed on Airline model 14WG-737A (chassis 7A58)\u003cbr\u003eAlso uesd on \u003cspan\u003eSilvetone 2421\u003c\/span\u003e farm radio chassis 101.602, probably model 2061 also.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 13\/16” diameter base, 5\/32” height of base, 1\/2” narrower part, 9\/32” height, 7\/16” overall height, 1\/4” hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857685825,"sku":"ch33","price":2.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch33.jpg?v=1771523194"},{"product_id":"cw-542","title":"Chassis Support","description":"\u003cp align=\"left\"\u003eThis chassis cushion is similar to ch1, but slightly thicker, and with a wider hole to make it easier to line up the chassis hole with the cabinet hole.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eRubber cushion used under the chassis. Used in Waltons, and many other zenith tombstones and consoles from 1935 - 1939. PRICE IS FOR ONE.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eModels: 6B107 6B129, 6B164, 6S128, 6S137, 6S147, 6S152, 6S157, 6S161, 7J232, 7J259, 7S204, 7S232, 7S240, 7S242, 7S258, 7S260, 7S261, 7S633, 8A232, 8A242, 8A129, 8A154, 8A157, 8A244, 8A262, 8S129, 8S154, 9S30 9S54, 9S55, 9S203, 9S204, 9S232, 9S242, 9S244, 9S262, 9S263, 9S264, 10S130, 10S147, 10S153, 10S155, 10S156, 10S157, 10S160, 12S205, 12S232, 12S245, 12S265, 12S266, 12S267, 12S268, 12L57, 12L58, 12A57, 12A58, 15U246, 15U169, 15U270, 15U271, 15U272, 15U273, 1000ZDimensions: 1-1\/4\" diameter, 1\/2\" thick, 3\/8\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405857718593,"sku":"ch2","price":2.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch2.jpg?v=1771523195"},{"product_id":"cw-275","title":"Chassis Supports","description":"\u003cp align=\"left\"\u003eThese sleeves are supposed to help cushion the chassis from underneath the board it's mounted on. The ones on my Philco 40-190 were hard as a rock.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 1\/2\" diameter, 7\/16\" thick, 3\/16\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405860864321,"sku":"ch15","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch15.jpg?v=1771523196"},{"product_id":"cw-296","title":"Chassis Supports (4)","description":"\u003cp align=\"left\"\u003eThese rubber mounts are located on the four corners of the chassis and keep it suspended giving the chassis some \"wiggle room\" to prevent the tubes from being jarred by someone bumping the radio. These new corners mounts will bring your chassis back up to the correct height and your control shafts will then be centered in the cabinet holes instead of rubbing on the bottoms of the holes.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eFound on models: 1935 models and model 16, 18, 37-62-T, 38-1, 38-2, 38-3, 38-4, 38-7, 38-9, 38-10,  39-25, 39-30, 39-40, 39-55RX, 39-116, 40-30,  40-50, 40-180, 40-150, 40-155, 40-158, 40-160, 40-165, 40-180, 40-185, 40-190, 40-195, 41-250, 41-255, 41-256, 41-265, 41-280, 41-285, 41-290, 41-295, 41-296, \u003cspan\u003e41-300, 41-315, \u003cspan\u003e41-316\u003c\/span\u003e, 41-316 and 41-616\u003c\/span\u003e41-608, 41-609, \u003cspan\u003e41-616\u003c\/span\u003e, 42-39, 42-355, 42-360F, 42-380, 42-380X, 42-395, 42-400, 42-1008, \u003cspan\u003e\u003cspan\u003e42-1010, 42-1011, \u003c\/span\u003e42-1015\u003c\/span\u003e, 45, 118X, and more.\u003cbr\u003e Possibly fit the 48-1274 (Hepplewhite) and the 48-1276 (Sheraton). \u003cbr\u003e Philco television 48- 700, 49-1040, TV-only “mini-console” models 49-1150, 49-1290, and 49-1450 and probably all TV\/Radio and TV\/Radio\/Phono “combination” models from the 1949 model year containing the same type of TV chassis. Airline 62-704 as well.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eIf anyone knows of any other models that use them, I'd appreciate it if you'd let me know.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eDimensions: 3\/4\" length, 3\/4\" width, 1\" height\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405860897089,"sku":"ch25","price":14.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch25.jpg?v=1771523198"},{"product_id":"cw-277","title":"Chassis Supports (set of 3)","description":"\u003cp\u003eHere's a part I'll bet you can use. These are Urethane isolation grommets for Philco chassis such as the 37-610. This chassis has a separate RF sub-chassis mounted in the center of the main chassis, and it's suspended there by three of these grommets. The grommets are usually hard as rock and crumbling. These grommets are the right size, and the right hardness, and will reduce vibrations. \u003cbr\u003e Note: The Philco Radiobar 37-61 uses a similar part but these are a little too thick These can be used if you jam them in.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTwo pieces of this set are identical. They go on the sides of the sub-chassis. One is smaller in diameter, and thicker. It supports the back of the sub-chassis.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/8\"diameter, 7\/8\" smaller diameter, 5\/16\" total thickness, 3\/16\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405860962625,"sku":"ch17","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch17.jpg?v=1771523199"},{"product_id":"cw-397","title":"Clock Knob Shaft Repair","description":"\u003cp\u003e\u003cspan style=\"font-family: Georgia,Times New Roman,Times,serif; font-size: medium;\"\u003eGot a broken shaft that prevents you from putting that missing clock knob in place? Use one of these handy parts to fix that shaft. You'll need to remove the chassis from the cabinet, but before you do, determine how much you should cut off the shaft. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: Georgia,Times New Roman,Times,serif; font-size: medium;\"\u003eshaft diameter: 1\/8\"\u003cbr\u003e \u003c\/span\u003e\u003cspan style=\"font-family: Georgia,Times New Roman,Times,serif; font-size: medium;\"\u003esocket length: 3\/16\"\u003cbr\u003e \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: Georgia,Times New Roman,Times,serif; font-size: medium;\"\u003etotal length:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: Georgia,Times New Roman,Times,serif; font-size: medium;\"\u003e\u003cbr\u003e \u003cstrong\u003elong\u003c\/strong\u003e: 1-1\/16\"\u003cbr\u003e \u003cstrong\u003emedium\u003c\/strong\u003e: 13\/16\"\u003cbr\u003e\u003cstrong\u003emedium-short\u003c\/strong\u003e: 11\/16\"\u003cbr\u003e \u003cstrong\u003eshort\u003c\/strong\u003e: 9\/16\"\u003cbr\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"9\/16 inch","offer_id":51405860995393,"sku":"cl-9\/16","price":9.0,"currency_code":"USD","in_stock":false},{"title":"13\/16 inch","offer_id":51405861028161,"sku":"cl-13\/16","price":9.0,"currency_code":"USD","in_stock":false},{"title":"1-1\/16 inch","offer_id":51405861060929,"sku":"cl-1-1\/16","price":9.0,"currency_code":"USD","in_stock":true},{"title":"11\/16 inch","offer_id":51405861093697,"sku":"cl-11\/16","price":9.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/clockknob-shafts.jpg?v=1771523201"},{"product_id":"cw-513","title":"Dial Bulb Pigtail","description":"\u003cp\u003eAssembly fits inside dial bulb holder tube. Spacers, spring, and wire.\u003cbr\u003e\u003cbr\u003eDimensions: disks are 38\" diameter, wire is 12\" long\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405862797633,"sku":"mc4","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/mc4.jpg?v=1771523225"},{"product_id":"cw-478","title":"Dial Cord","description":"\u003cp\u003eDial cord for radios. 0.028\" diameter, 25 foot length.\u003c\/p\u003e\r\n\u003cp\u003eThis is the most common thickness for vintage radios.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"0.028","offer_id":51405862830401,"sku":"s18","price":11.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Dial-Cord.jpg?v=1771523225"},{"product_id":"cw-279","title":"Dial Support","description":"\u003cp\u003eThese are small grommets that go on the push-button assembly between it and the copper\/brown plate that is behind the dial. Some used on the back support too. A total of 9 needed I'm told.  (NOTE: same as item t20)\u003c\/p\u003e\r\n\u003cp\u003eModels: 40-135 ,40-165 (push buttons use 3, tuning condenser uses 4) and 46-480, 41-608. Also \u003cspan\u003eThe dial supports are the exact replacements for the Philco 40-150. They are used in 6 places. 4 for the tuner, 2 for the pushbutton assembly (according to a restorer). \u003c\/span\u003eAlso used on tuners of some of the transitone table bakelite models such as the 46-200.\u003c\/p\u003e\r\n\u003cp\u003eAlso used on the back of the tuner on a Phico 37-61\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\/2\" diameter, 5\/16\" thick, 1\/16\" offset groove, with a 1\/4\" hole, fits a 3\/8\" chassis hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405863125313,"sku":"ch19","price":2.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch19.jpg?v=1771523227"},{"product_id":"cw-453","title":"Fada 1000","description":"\u003cp\u003eGrommet for Fada 1000 and other Fada radios.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 9\/16\" width, 3\/16\" tall, 7\/32\" hole, fits a 3\/8\" chassis hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405863813441,"sku":"t21","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-T21.jpg?v=1771523238"},{"product_id":"cw-423","title":"Graphophone Chassis Support","description":"\u003cp\u003eSold as a set of four. Isolates the cabinet from the bedplate. Used on Columbia Model A, AA, AT, AO, AW, BE, BF, and maybe others.\u003c\/p\u003e\r\n\u003cp\u003ePRICE IS FOR ONE.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 7\/16” long, 7\/16” smaller diameter, 21\/32” larger diameter, 1\/4” hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405865353537,"sku":"ph9","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch37.jpg?v=1771523261"},{"product_id":"cw-445","title":"Mallory Encyclopedia","description":"\u003ch1 align=\"center\"\u003eMallory Encyclopedia on CD\u003c\/h1\u003e\r\n\u003cp\u003eThis is another great resource for people who like to repair old tube-type radios. Now, the Mallory Encyclopedia is on CD. The entire book (479 pages!) is contained on one CD, scanned at 300 dpi so that you won’t be straining your eyes to read the fine print, and nearly the entire book is in fine print because they really crammed in a lot of data.\u003c\/p\u003e\r\n\u003cp\u003eThis book will be of interest to anyone who works on pre-war (1942) radios, especially those radios that have missing model numbers or have been modified by previous technicians.  Just having the tube data available is a tremendous help.\u003c\/p\u003e\r\n\u003cp\u003eClick \u003ca\u003eHERE\u003c\/a\u003e to view a page from the book.\u003c\/p\u003e\r\n\u003cp\u003eThis CD contains the book in its entirety in Adobe PDF format with an auto-start program that allows you to just put the CD into your player and start viewing the data and an alphabetical index so you can quickly find the radio data you need.\u003c\/p\u003e\r\n\u003cp\u003eYou’ll need to have Adobe Acrobat Reader installed on your computer and a web browser.\u003c\/p\u003e\r\n\u003cp\u003eThis reference book is of great use to the modern radio-repair person. It was primarily written to enable the radio technician to quickly look up a receiver and determine the correct part number of a Mallory replacement part.  Although Mallory replacement parts are still available to some extent, there is much more information of value to the modern radio technician as you’ll see below.\u003c\/p\u003e\r\n\u003cp\u003eThe book has listings of over 28,000 different receivers from the earliest receivers up to the spring of 1942 (all pre-war sets). Receivers are listed by manufacturer’s name and cross-referenced by popular names.  Model numbers are listed under manufacturer along with chassis numbers.\u003c\/p\u003e\r\n\u003cp align=\"center\"\u003eClick \u003ca\u003eHERE\u003c\/a\u003e to view a small sample of the book in pdf format.\u003c\/p\u003e\r\n\u003cp align=\"center\"\u003e(A 13 Mb download – not for phone lines!)\u003c\/p\u003e\r\n\u003cp\u003eThe data are divided into sections on each page.  Listed below are types of information you will find under each section.\u003c\/p\u003e\r\n\u003ch2 align=\"center\"\u003eCONTENTS\u003c\/h2\u003e\r\n\u003ch3\u003eCONTROLS:\u003c\/h3\u003e\r\n\u003cp\u003eFind control circuit diagrams for the listed control (vol., tone, etc.). Determine if the circuit has been changed by a previous technician. Find original part number. Determine if part has been previously replaced. Find Mallory replacement number. Determine wiring in case of lost connections during replacement.\u003c\/p\u003e\r\n\u003ch3\u003eTUBES:\u003c\/h3\u003e\r\n\u003cp\u003eFind the total number of tubes and amount of each type. Determine if tubes are correct ones. Find whether subsequent model changes called for more modern replacement tubes.\u003c\/p\u003e\r\n\u003ch3\u003eI.F.PEAK:\u003c\/h3\u003e\r\n\u003cp\u003eFind the Intermediate Frequency for the receiver. Find if changes in the I.F. were later called for.\u003c\/p\u003e\r\n\u003ch3\u003eCAPACITORS:\u003c\/h3\u003e\r\n\u003cp\u003eFind the number of filter capacitors in the original circuit. Determine if original caps were separate or multi-caps. Find the value of filter and other capacitors in the original circuit. Determine the capacitor value without being able to read the markings on the old capacitors. Find a circuit diagram of the filter capacitors. Determine if the circuit has been altered. Find original part number. Determine if part has been previously replaced. Find Mallory replacement number.\u003c\/p\u003e\r\n\u003ch3\u003eNOTES:\u003c\/h3\u003e\r\n\u003cp\u003eFind over 150 capacitor notes. Read how to replace certain caps, how to properly route the wires, determine which wire goes where, etc.\u003c\/p\u003e\r\n\u003ch3\u003eVIBRATORS:\u003c\/h3\u003e\r\n\u003cp\u003eFind part numbers of original vibrators. Find Mallory replacement part number. Find proper pin connections. Find vibrator circuit diagram. Find vibrator substitution data. Find notes on specific vibrators.\u003c\/p\u003e\r\n\u003ch3\u003eREFERENCE:\u003c\/h3\u003e\r\n\u003cp\u003eFind Rider’s volume number and page number(s) for the selected receiver.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405873643841,"sku":"Mallory Enc.","price":8.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/CD3MalloryEncyclopediaCover.jpg?v=1771523283"},{"product_id":"cw-452","title":"Philco Hippo Tuner Grommet","description":"\u003cp\u003eUsed in the 42-390, 46-200, 46-420, and 48- models code 121 and 40-180. Other models used a different tuner grommet. \u003cspan\u003ePhilco mystery remote dial, also for the volume control motor and stepper assembly on a 40-216\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eSee item t01.\u003c\/p\u003e\r\n\u003cp\u003e(NOTE: same as item ch19)\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\/2\" wide, 11\/32\" tall, 1\/4\" hole, fits a 5\/16\" chassis hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405874200897,"sku":"t20","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-T20.jpg?v=1771523292"},{"product_id":"cw-278","title":"Philco 690 Chassis Supports (set of 3)","description":"\u003cp\u003eThese are silicone isolation grommets for Philco chassis such as the 37-690 and 38-690. This chassis is like the described above, but the holes for the grommets are smaller. These grommets are a little taller so they reach into the hole farther.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\" diameter, 3\/4\" smaller diameter, 7\/16\" total thickness , 1\/4\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405874430273,"sku":"ch18","price":8.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch18.jpg?v=1771523298"},{"product_id":"cw-435","title":"Philco Chassis Screw (large)","description":"\u003cp\u003eThese are the screws that go up under the chassis support board and screw into the chassis to hold it in place. Four are needed for a chassis\u003cstrong\u003e. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eUsed on \u003cstrong\u003e1930-1934\u003c\/strong\u003e Philcos.\u003c\/p\u003e\r\n\u003cp\u003eA thinner, smaller screw (item s09) is used on\u003cstrong\u003e 1939-1942 \u003c\/strong\u003eand some\u003cstrong\u003e 1935-1936 \u003c\/strong\u003emodels. Some 1936 models that came with shipping bolts need a longer #12 screw. (not supplied here)\u003c\/p\u003e\r\n\u003cp\u003eNote: None of these screws are exactly like the original screws, but they work.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\/4 x 1-1\/2\" screw, 3\/4\" washer\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405874626881,"sku":"s13","price":0.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Philco-chassis-screw-Lg.jpg?v=1771523304"},{"product_id":"cw-434","title":"Philco Chassis Screw (small)","description":"\u003cp\u003eThese are the screws that go up under the chassis support board and screw into the chassis to hold it in place. Four are needed for a chassis. \u003cbr\u003e \u003cbr\u003e \u003cstrong\u003e1939-1942 and some 1935-1936 models\u003c\/strong\u003e use this screw. On some models, Philco Screw Sleeves (item ch15) need to be placed on the screws before assembly. They are found on the 40-190 and many others. \u003c\/p\u003e\r\n\u003cp\u003eDimensions: #12 x 1-1\/4\" screw, 1\" washer\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"1-1\/16 inch","offer_id":51405874659649,"sku":"s09","price":0.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Philco-chassis-screw-Sm.jpg?v=1771523305"},{"product_id":"cw-264","title":"Philco Chassis Support","description":"\u003cp\u003eUsed between the chassis and the board it sits on. Used on 1932 - 1938 Philco radios.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 7\/8\" diameter, 1\/4\" thick, 1\/4\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405874692417,"sku":"ch4","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch4.jpg?v=1771523306"},{"product_id":"cw-447","title":"Philco Chassis Support","description":"\u003cp\u003eUsed between the chassis and the board it sits on. Used on 1932 - 1938 Philco radios.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 7\/8\" diameter, 3\/8\" thick, 1\/4\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405874725185,"sku":"ch32","price":2.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch32.jpg?v=1771523306"},{"product_id":"cw-297","title":"Philco Shadow Meter Mask","description":"\u003cp\u003eIf you've discovered some nasty black goop on the inside of your radio cabinet that has dripped down over the dial, tuner, and chassis, it's probably all that's left of the original shadow meter mask. This mask goes over the light-box end of the meter. It acts as a bumper against the front of the cabinet and also seals the opening so light goes where it's intended.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/2\" length, 5\/8\" width, 1\/2 \" height\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405875315009,"sku":"ch26","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch26.jpg?v=1771523322"},{"product_id":"cw-345","title":"Philco Thin Chassis Bumper \/ Spacer","description":"\u003cp\u003eThese grommets are used on the control shafts to keep the chassis from bumping against the front of the cabinet. Sometimes they need replacing or are missing. These were found on a Philco model 37-89. Probably used on other models too.   \u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1-1\/8\" diameter, 1\/4\" thickness. 1\/4\" hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405875478849,"sku":"ch35","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch36.jpg?v=1771523326"},{"product_id":"cw-255","title":"Pointer for 1937 Philco Radios","description":"\u003cp\u003eThis pointer sits on the shaft just under a knob centered over a tuning dial. The control shaft for the knob goes right through the dial itself.\u003c\/p\u003e\r\n\u003cp\u003eModels: Philco 84, 37-84, 37-84B - May also be used on models 37-93, 37-33, 37-333B (Canadian), 37-33F, 37-62, 37-600, 37-602\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 5\/16\" hole, 7\/8\" total length\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405875839297,"sku":"p1","price":5.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Philco-p1a.jpg?v=1771523333"},{"product_id":"cw-363","title":"RCA 143 Chassis Support","description":"\u003cp\u003eUsed on RCA model 143 May also be used on the RCA model 128 and possibly others. It uses EIGHT washers - four above the bottom board and four below.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 7\/8” diameter, 3\/8” tall, 3\/8” hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405876166977,"sku":"ch39","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch39.jpg?v=1771523340"},{"product_id":"cw-325","title":"RCA chassis support","description":"\u003cp\u003eThese flexible cones support the changer mechanism inside the cabinet. They are stiff enough to support the weight, yet flexible enough to still reduce vibrations that can be transmitted to the pickup.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 5\/8\" diameter at the base, 19\/32\" thick, 13\/32\" wide at the top, 1\/4\" hole\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405876232513,"sku":"ph2","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Phono-ph2.jpg?v=1771523343"},{"product_id":"cw-120","title":"RCA Pushbuttons (set of 10) pb03","description":"\u003cp\u003e\u003cstrong\u003ePrice is for one set of 10 push-buttons.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eRCA part # 31358\u003c\/p\u003e\r\n\u003cp\u003eIf you are not sure whether these are correct for your radio or television, look at the back of the existing buttons and see if they match the shape of the one shown in the picture. Click on the picture for a better view.\u003c\/p\u003e\r\n\u003cp\u003ePrice is for a set of ten.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRadio models:\u003c\/strong\u003e 1938: 11QU (Chassis RC-335), 910KG (Chassis RC-335), 99T (Chassis RC-335), HF2\u003c\/p\u003e\r\n\u003cp\u003e1939: 11Q4, 11QK, 98K, 99K, , 911K, U30 (Chassis RC-335), U129 (Chassis RC-335), TRK-9, 90, 12, 120 TV sets (Chassis RC-427)\u003cbr\u003eMaybe U46 and K130, (Chassis RC-501), which use a different RCA part number (35033), but look very similar in the photos)\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eTelevision models:\u003c\/strong\u003e TRK-9, TRK-90, TRK-12, TRK-120, maybe U46, and K130\u003c\/p\u003e\r\n\u003cp\u003eThese are 1938 and 1939 sets. They may fit 1940 and 1941 sets too.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405876527425,"sku":"TRK-tang","price":98.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/RCA-TRK-Buttonsb.jpg?v=1771523350"},{"product_id":"cw-302","title":"RCA\/Fairbanks Morse Chassis Support","description":"\u003cp\u003eThese grommets support the chassis, one on each corner. They need a hollow steel insert. The bolt goes through the steel insert.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 1\" diameter, 1\/2\" thick, 1\/2\" hole, fits a 5\/8\" chassis hole.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405877051713,"sku":"ch29","price":2.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch29.jpg?v=1771523366"},{"product_id":"cw-342","title":"RCA\/GE\/Westinghouse Early 1930's Support","description":"\u003cp\u003eChassis mount for RCA R7A, R74, and 141. Also GE J82, K80, K85 (1933 and 1934). Radios take four mounts each. (The front mounts need to be trimmed to length.) Note: These won't work in a Canadian Deforest.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: 11\/16\" x 1\/2\" x 2-1\/4\" long. Slot is 3\/8\" deep, 2-1\/8\" long.\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"Default Title","offer_id":51405877084481,"sku":"ch31","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-ch31.jpg?v=1771523367"},{"product_id":"cw-511","title":"Rubber Dial Glass Extrusion Gasket","description":"\u003cp\u003eRubber extrusion is used to protect the edge of dial glass. This fits Zenith radio dial glass from 1939 on. It will also fit other dial glass from other brands. Check the thickness of your glass before ordering.\u003c\/p\u003e\r\n\u003cp\u003ePRICE IS PER FOOT. CHOOSE THE QUANTITY YOU NEED.\u003c\/p\u003e\r\n\u003cp\u003eDimensions: slot width 0.080\" (5\/64), leg width 0.060, overall width 0.200, slot depth 0.105 (~7\/64), overall depth 0.165\" (~5\/32)\u003c\/p\u003e","brand":"Renovated Radios","offers":[{"title":"1-1\/4 inch","offer_id":51405878198593,"sku":"cw2-80","price":3.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/files\/Rubber-mc3.jpg?v=1771523408"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8160\/5953\/collections\/Boyd_Fairbanks_Morse_58-T-1__1936.jpg?v=1770575191","url":"https:\/\/renovatedradios.com\/collections\/chassis-parts.oembed","provider":"Renovated Radios, LLC: Reproduction Vintage Radio Parts","version":"1.0","type":"link"}